SR-16-006 – CVT Hesitation – 2015-2016 Mitsubishi Outlander Sport & 2016 Outlander & Lancer

“This site contains affiliate links for which OEMDTC may be compensated”

July 28, 2016 NHTSA CAMPAIGN NUMBER: 16V563000

Vehicle Hesitation when Accelerating

A hesitation during acceleration can increase the risk of a crash.

 

NHTSA Campaign Number: 16V563

Manufacturer Mitsubishi Motors North America, Inc.

Components POWER TRAIN

Potential Number of Units Affected 82,436

 

Summary

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2015-2016 Outlander Sport vehicles and 2016 Outlander and Lancer vehicles. The affected vehicles are equipped with a constant velocity transmission (CVT) that, in certain driving conditions, may cause a delay in the vehicle accelerating.

 

Remedy

MMNA has notified owners, and dealers will reprogram the CVT control unit with modified software, free of charge. The recall began on August 15, 2016. Owners may contact MMNA customer service at 1-888-648-7820. MMNA’s number for this recall is SR-16-006.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Mitsubishi has a Recall

 


 

PURPOSE

During initial acceleration from a standstill, or when accelerating again after either constant speed operation or coasting down, affected CVT equipped vehicles may experience a hesitation if the range switch momentarily experiences a loss of signal.

This Safety Recall Bulletin provides instructions for reprogramming the CVT-ECU with a modified software. The modified software ignores the momentary loss of the range switch signal.

 

BACKGROUND

When the range switch momentarily experiences a loss of signal, the CVT-ECU believes that the driver has manually shifted the selector from neutral (N) to drive (D) while the throttle is open. In response, the CVT-ECU instructs the engine ECU to reduce its torque output to prevent “shift shock” and slippage of the CVT metal belt. This reduction in engine torque can directly affect vehicle acceleration and would be perceived by the driver as vehicle hesitation.

 

AFFECTED VEHICLES

2015-2016 Outlander Sport/RVR with 2.0L Engine and CVT8

2016 Outlander with 2.4L Engine and CVT8

2016 Lancer with CVT8

CVT-ECU Reprogramming

 

REQUIRED OPERATIONS

  1. Confirm your MUT-III is updated with the latest reprogramming database.
  2. Reprogram the CVT-ECU with the new software. Refer to the CVT-ECU Reprogramming Chart for new software information.

NOTE: Reprogramming can only be performed with MUT-III, not MUT3-SE.

IMPORTANT: If an affected vehicle has a Malfunction Indicator Lamp (MIL) illuminated before reprogramming, and DTCs are listed in the TCM memory, diagnose and repair those DTCs per the service manual before reprogramming. DO NOT reprogram the CVT-ECU until the reason(s) for other DTCs being set is corrected.

 

EQUIPMENT

The following equipment is needed to reprogram the CVT-ECU.

  • VCI (Vehicle Communication Interface) or VCI Lite – MB991824 or MB992744.
  • MEDIC Laptop/Tablet with A/C power adapter – 520924, or FZG1MK2.
  • MUT-III main harness ‘A’ (blue connector at the DLC end) – MB991910 or MB992745.
  • USB 2.0 cable – MB991827 or MB992747.
  • MEDIC 3.5/4 update at 408 or higher.
  • For Standalone MUT-III units, MUT-III Reprogramming Database N16071 or higher.

 

CVT-ECU REPROGRAMMING CHART

Model ECU Part Number Data No. Software Part Number
Previous New
2015 Outlander Sport/RVR 4B11
(GA0W; F1CJC, W1CJC)
8631B287 8631B780 8631B287 0A to 8631B287 0C 8631B287 0D
2016 Outlander Sport/RVR 4B11
(GA0W; F1CJC, W1CJC)
8631B462 8631B782 8631B462 0A to 8631B462 0C 8631B462 0D
2016 Outlander 4J12
(GF0W; F1CJC, W1CJC)
8631B371 8631B788 8631B371 0A to 8631B371 0C 8631B371 0D
2016 Lancer 4B11
(CY0A, CX0A; F1CJC, W1CJC)
8631B482 8631B802 8631B482 0A to 8631B482 0B 8631B482 0C
2016 Lancer 4B12
(CY0A, CX0A; F1CJC, W1CJC)
8631B483 8631B803 8631B483 0A to 8631B483 0B 8631B483 0C

 

REPAIR PROCEDURE

  1. Verify that the CVT-ECU has not already been updated to the latest S/W number in the table above. If the CVT-ECU is at the latest level, reprogramming is not necessary.
CVT-ECU Reprogramming

For MEDIC 3.5/4 users only: (MUT-III users go to step 5)

  1. Verify the MEDIC 3.5/4 is at version 3.5 and at update 408 or higher.If your MEDIC 3.5/4 update is at least 408, continue with the Reprogramming Procedure on page 4.If your MEDIC 3.5/4 update is below 408, update your MEDIC as follows.

 

CVT-ECU Reprogramming
  1. Select the MEDIC 3.5/4 Admin tab and click on “Updates.”
CVT-ECU Reprogramming
  1. IF the MEDIC update screen advises updates are available, click the “Begin” button. After all updates are complete, GO TO THE REPROGRAMMING PROCEDURE.
CVT-ECU Reprogramming
  1. STANDALONE MUT-III SCAN TOOL VIEWER (STV) ONLY: (MEDIC 3.5 USERS GO TO THE REPROGRAMMING PROCEDURE). Verify that your MUT-III has the most current version of the reprogramming database:
    From the MUT-III Main Page:

● Select “Special Function”

● Select “ECU Reprogramming

● Select “Database File Display-CAN”

● Confirm the database number displayed at the top right of the chart is N16071 or higher

  • If the database number displayed on your MUT-III is N16071 or greater, continue to the Reprogramming Procedure.
  • If the reprogramming database number displayed on your MUT-III is lower than N16071, locate the reprogramming CD containing database N16071 and follow the instructions provided with the CD to update your MUT-III.

 

REPROGRAMMING PROCEDURE

Caution! To ensure that the vehicle battery maintains 12V during the procedure, hook-up a battery charger to the vehicle during the procedure.

  1. Connect the equipment as follows:
  • Turn the MEDIC PC/tablet on. If the battery indicator in the lower right hand corner of the screen does not show a full charge, it is recommended that either the battery be charged prior to beginning, or be used with the A/C power adaptor connected.
  • Connect the USB cable to the VCI/VCI Lite.
  • When the laptop/tablet displays the MUT-III main screen, connect the USB cable to the device.
  • Connect the MUT-III main harness with the blue DLC connection to the VCI/VCI Lite.
  • Connect the blue connection of the MUT-III main harness to the vehicle’s data link connector.
  • Turn the VCI power switch ON . Verify that the indicator lamp in the upper right corner of the screen is green.

NOTE: VCI and MEDIC 3.5 Laptop shown for illustration purposes only.

CVT-ECU Reprogramming

  1. Turn the ignition switch to the “ON” position.
CVT-ECU Reprogramming
  1. If using MEDIC, from the main page, click the MUT-III STV icon at the top center of the screen to open MUT-III.Verify that the MUT-III/STV is at version 35 or later.

NOTE: Reprogramming can only be performed with MUT-III, not MUT3-SE.

  1. Click “System select.”
CVT-ECU Reprogramming
  1. Press the model information display button (car icon) and verify that all vehicle information is correct.
  • If vehicle information is NOT correct, follow steps a – c below.
  • If vehicle information is correct, click the check mark at the bottom of the page, then go to step 8.

 

CVT-ECU Reprogramming
  1. If the VIN or vehicle description displayed does not match the vehicle you are working on, click the eraser icon at the bottom of the page to erase vehicle data.
    Then click the “VIN” button.
CVT-ECU Reprogramming
  1. Click the icon in the lower RH corner of the screen to have MUT-III automatically read the VIN.If a message appears saying the VIN cannot be input automatically, manually enter the 17 digit VIN into the VIN field at the top of the page.Make sure the VIN is correct and click the check mark.
CVT-ECU Reprogramming
  1. Confirm all data matches the vehicle, then click on “Transmission.”
  2. Select the appropriate transmission, then click the check mark.

 

CVT-ECU Reprogramming
  1. Go to the MUT-III home screen and click on “Special function.”
CVT-ECU Reprogramming
  1. Select “ECU reprogramming.”
CVT-ECU Reprogramming
  1. In ECU reprogramming, select “Automatic Reprogramming (CAN).”
CVT-ECU Reprogramming
  1. Select “ELC-AT/CVT/TC-SST” from the System List. Click the check mark to continue.

 

NOTE: In the next step, if the “pop-up” box does not appear, change “Tab” to TIR then back to MUT-III (the pop-up box should then appear).

CVT-ECU Reprogramming
  1. A message will advise the system will “Automatic search the data.”Click the check mark to continue.
CVT-ECU Reprogramming

 

IF ECU IS ALREADY AT LATEST VERSION

CVT-ECU Reprogramming If the message seen at left is displayed, the ECU software is already at the most current level. Do not continue with the reprogramming procedure. This Recall is complete; note on the RO that the flash was not necessary and still submit a recall claim.

Click the check mark to clear the window, then click the Home icon at the lower left corner of the screen to return to the System Select main page.

Turn the ignition switch to the OFF position and disconnect the MUT-III. Turn off and disconnect the battery charger. Conduct normal diagnosis per the service manual.

If a “Complete Reprogramming” message does not appear, continue with the reprogramming procedure.

 

CVT-ECU Reprogramming
  1. The Automatic Reprogramming (CAN) database screen will display.
  • Verify that the new ECU and S/W part numbers are listed in the table.
  • Confirm the database number at the top right of the table is N16071 or higher.
  • If more than one row is displayed in the table, refer to the TCM Reprogramming Chart on page 2 to highlight and select the correct row.
  • Click the check mark to continue.
CVT-ECU Reprogramming
  1. The “Check reprogramming data” window should appear with the new file name.

NOTE: Refer to the CVT-ECU Reprogramming Chart on page 2 for the new file names.

  1. Click on the check mark in the pop-up box to initiate the reprogramming.
CVT-ECU Reprogramming
  1. Once the reprogramming is initiated, the screen as shown will indicate the reprogramming progress.

NOTE: Do not disturb the cables or turn off the ignition during reprogramming.

 

CVT-ECU Reprogramming

CVT-ECU Reprogramming
  1. Reprogramming is completed.
    1. Verify that the S/W Part No. is correct.
    2. Click on the check mark.
    3. Turn OFF ignition switch for at least 8 seconds.
    4. Turn ignition switch ON, then proceed to the next step.
CVT-ECU Reprogramming
  1. Click on the “home” button.
CVT-ECU Reprogramming
  1. Perform an “Erase and Read all DTCs.”
    1. Select “Special function.”
CVT-ECU Reprogramming
  1. Select “All DTCs.”
CVT-ECU Reprogramming
  1. Select “Erase and Read All DTCs.”
CVT-ECU Reprogramming
  1. The “System List” on the left side of the screen will have all selections checked. Do not change these selections. DTCs may be set if the vehicle is equipped with options that are unchecked.
  2. Click the check mark to continue.
CVT-ECU Reprogramming NOTE: If, in some cases, the check mark button at the bottom is not active, perform the following:

1) Select the System name that is underlined (for example, TPMS, as shown on left).

2) Select the appropriate option for the vehicle.
Repeat steps 1 and 2 for all underlined systems.

3) Click on the check mark. Wait until MUT-III is finished and click the check mark again to confirm.

NOTE: For “Loading Option Setup,” where the options are “Can see P/N on ECU body” or “Can’t see P/N on ECU body,” refer to TIN-16-00-002’s “Loading Option Setup” on pages 6-11. (These pages apply to MUT-III as well as MUT3-SE.)

  1. A window will pop up asking you to confirm DTC erasing. Click the check mark for DTC erasing and reading to begin.
CVT-ECU Reprogramming
  1. When DTC erasing is completed, click the check mark in the pop-up message that reads “All erasing and checks are completed.”

a. If DTCs return after reprogramming, click the check mark to clear the window. Diagnose and repair per the Service Manual.

b. If DTCs do not return, click the check mark to clear the window, then click the home icon at the lower left of the screen to return to the main menu.

 

  1. Turn off the ignition switch and disconnect the MUT-III. Turn off and disconnect the battery charger.
  2. Test drive the vehicle to confirm proper operation and the MIL does not illuminate.

 

PARTS INFORMATION

No parts are required for the completion of this recall.

 


4 Affected Products

Vehicles

MAKE MODEL YEAR
MITSUBISHI LANCER 2016
MITSUBISHI OUTLANDER 2016
MITSUBISHI OUTLANDER SPORT 2015-2016

 


19 Associated Documents

Recall Acknowledgement

RCAK-16V563-9567.pdf 247.412KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [241.61 KB]

 


ISSUED Owner Notification Letter(Part 577) – 2015 Outlander Sport Vehicles

RCONL-16V563-1526.pdf 144.513KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [141.13 KB]

 


ISSUED Owner Notification Letter(Part 577) – 2015-2016 Outlander Sport, and 2016 Outlander and Lancer Vehicles

RCONL-16V563-9941.pdf 41.544KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [40.57 KB]

 


Defect Notice 573 Report

RCLRPT-16V563-5583.PDF 217.814KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [212.71 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-16V563-8614.pdf 215.92KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.86 KB]

 


Remedy Instructions and TSB

RCRIT-16V563-4225.pdf 1996.409KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.90 MB]

 


Remedy Instructions and TSB

RCRIT-16V563-1022.pdf 1702.227KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.62 MB]

 


Miscellaneous Document

RMISC-16V563-2093.pdf 578.874KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [565.31 KB]

 


Miscellaneous Document

RMISC-16V563-7136.pdf 132.397KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [129.29 KB]

 


Recall Quarterly Report #1, 2016-3

RCLQRT-16V563-5849.PDF 214.533KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.50 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-16V563-9032.pdf 295.588KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [288.66 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-16V563-1390.pdf 294.815KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [287.91 KB]

 


Miscellaneous Document

RMISC-16V563-0401.pdf 131.582KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [128.50 KB]

 


Miscellaneous Document

RMISC-16V563-2933.pdf 438.408KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [428.13 KB]

 


Recall Quarterly Report #4, 2017-2

RCLQRT-16V563-7450.PDF 214.831KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.80 KB]

 


Recall Quarterly Report #2, 2016-4

RCLQRT-16V563-9679.PDF 214.635KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.60 KB]

 


Recall Quarterly Report #3, 2017-1

RCLQRT-16V563-7063.PDF 214.738KB

mitsubishi.oemdtc.com/wp-content/plugins/embed-any-document/images/loading.svg" width="55" height="55" alt="Loader"> Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.71 KB]

 


Recall Quarterly Report #5, 2017-3

RCLQRT-16V563-7280.PDF 214.941KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.90 KB]

 


Recall Quarterly Report #6, 2017-4

RCLQRT-16V563-7582.PDF 215.029KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.99 KB]

 


LatestRecalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=16V563&docType=RCL

 


 

Reprogramming

J2534 Reprogramming - Mitsubishi

 

Introduction

Mitsubishi Motors North America, Inc. offers J2534-1 Powertrain Control Module (PCM) re-flash capability in accordance with CARB & EPA regulations. Mitsubishi Motors vehicles use re-flashable PCMs starting with the 1998 model year. Before attempting a re-flash of a Mitsubishi PCM, you must obtain a validated J2534-1 pass-thru device. In addition, you must only re-flash a Mitsubishi PCM when a specific Mitsubishi Motors Technical Service Bulletin (TSB) calls for it. All TSBs are available in the Service Information portion of this website. In some cases, re-flash procedures are accompanied by replacement of parts or other related procedures. Failure to follow these guidelines may result in an unsatisfactory repair.

 

What is J2534-1?

J2534-1 is a Society of Automotive Engineers (SAE) standard that enables the use of a J2534-1 pass-thru device (available through Special Tool Manufacturers) and a personal computer to re-program a PCM with updated instructions, as well as perform other procedures on some PCMs. Mitsubishi Motors vehicles use re-flashable PCMs starting with the 1998 model year. Before attempting a re-flash of a Mitsubishi PCM, you must obtain a validated J2534-1 pass-thru device. In addition, you must only re-flash a Mitsubishi PCM when a specific Mitsubishi Motors Technical Service Bulletin (TSB) calls for it. All TSBs are available in the Service Information portion of this website. In some cases, re-flash procedures are accompanied by replacement of parts or other related procedures. Failure to follow these guidelines may result in an unsatisfactory repair.

There are two distinct families of PCMs, based on the communication protocol used for re-flashing. Each family of PCMs requires a specific software solution available on this website as follows:

  • Legacy PCMs Refer to (Reprogramming System Identification Chart) for details (ISO9141) protocol for re-flash communication. A software application, Update Manager, is required to re-flash this type of PCM. Update Manager consists of 2 parts, Update Manager A & Update Manager B. Use Update Manager A to determine the current PCM instruction level (current flash level), known as ROM-ID. Then use Update Manager B to re-flash the PCM with re-flash files and other support files downloaded from this website. If installed for the first time, some K-Line PCM's require additional initialization procedures - for example, Immobilizer Key Code Transfer. To perform these initialization procedures, a MUT-III Special tool must be used. Please refer to the "Special Tool" section of this webpage for details.
  • The latest technology PCMs Refer to (Reprogramming System Identification Chart) use CAN protocol for re-flash communication. In addition, some CAN-based PCMs require additional initialization procedures if installed in a vehicle for the first time, such as VIN writing, Variant Coding (programming specific vehicle attributes) and Immobilizer Key Code Transfer. All procedures are done using the MUT3-SE CAN Passthru application available for download from this website. Use MUT3-SE CAN Passthru to obtain the PCM Part number, VIN stored in the PCM (necessary before any other procedures). Then download additional software components and support files through MCDS Server to enable the MUT3-SE CAN Pass-Thru application to perform other procedures as needed.

 


 

SR-16-006 - CVT Hesitation - 2015-2016 Mitsubishi Outlander Sport & 2016 Outlander & Lancer | small light

CarDAQ-Plus 3 All Makes J2534 Programming Tool

SR-16-006 - CVT Hesitation - 2015-2016 Mitsubishi Outlander Sport & 2016 Outlander & Lancer | small light Autel MF2534 Maxi Flash J-2534 Vci
SR-16-006 - CVT Hesitation - 2015-2016 Mitsubishi Outlander Sport & 2016 Outlander & Lancer | small light Drew Tech Mongoose Pro USB to CAN ISO9141 Interface
Dearborn d-Bridge Adapter J2534 OBDII Engineering Tool
SR-16-006 - CVT Hesitation - 2015-2016 Mitsubishi Outlander Sport & 2016 Outlander & Lancer | small light CarDAQ-M Auto Universal Diagnostic Scanner and Programming Tool VSI J2534

SR-16-006 - CVT Hesitation - 2015-2016 Mitsubishi Outlander Sport & 2016 Outlander & Lancer | small light

Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit

Drew Tech Mongoose Pro ISO-CAN 2

 

 


https://mitsubishitechinfo.com

https://mitsubishitechinfo.com/epacarb/

 


 

Bestseller No. 1
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 2
VNCI J2534 for Nano Diagnostic Tools,Support J2534 for Automatic Switch Mode Fast Communication
  • Application:Support most all of J2534 compatible software, most all of for software, ECU reprogramming in J2534 mode with programming voltage, supply software for diagnosing J1979 compatible vehicles.
  • Material:VNCI (Vehicle network communication interface) is a device that works between diagnostic software and vehicle. It is compatible with J2534 Passthru and for .
  • Advantage:Support J2534 and for mode in one device, and has automatic switch mode, more speedup, faster communication and reprogramming.VNCI J2534 for Nano protocol configuration include, for ISO15765, for ISO9141, for ISO14230, for J1850 PWM( supports IFR and 2X speed modes), for J1850 VPW (supports 4x speed mode).
  • Easy to install:More stability, never let you down while reprogramming, portable and convenient, small package and easy to carry.
  • Best Experience :We strive to provide you with the best quality products and the best customer experience.We try our best to meet your requirements.Please check the product information carefuly berore buying to aviod making mistakes.
Bestseller No. 3
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Multi-Protocol PassThru Interface, Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MS908CV, MK908P, MK908 Pro II and PC
  • 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
  • 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
  • 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
  • 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
Bestseller No. 4
Mongoose-Plus J2534 OEM Vehicle Interface Cable - GM OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
  • Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 5
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Vehicle Communication Interface,Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MK908 Pro II, MS908CV, MK908P and PC
  • 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
  • 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
  • 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
  • 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.

Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...