Steering Column Noise When Turning – 2004-2005 Mitsubishi

SUBJECT: STEERING COLUMN NOISE WHEN TURNING No: TSB-05-54-007 DATE: September, 2005 MODEL: See below   PURPOSE The steering cancel cam on some affected vehicles may not be completely depressed by the steering wheel. As a result, when the steering wheel is turned, the cancel cam tabs may contact the steering column inner housing, creating a … Read more

Noise From Front Wheel Hub Bearing – 2001-2003 Mitsubishi Montero

SUBJECT: NOISE FROM FRONT WHEEL HUB BEARING No: TSB-03-26-002 DATE: August, 2003 MODEL: 2001-03 Montero   PURPOSE This bulletin contains information about improvements to the front wheel hub bearing for certain 2001-03 Montero vehicles. BACKGROUND INFORMATION Symptom While driving, customers may notice a noise from the front wheel bearing(s).   Cause This bearing noise may … Read more

Rear Hatch (Lift Gate) Noise – 1997-2002 Mitsubishi Montero Sport

SUBJECT: REAR HATCH (LIFT GATE) NOISE No: TSB-01-42A-010 DATE: August, 2001 MODEL: 1997-2002 Montero Sport   PURPOSE The bulletin contains instructions for eliminating a popping noise from the rear hatch area of the vehicle.   BACKGROUND INFORMATION Customers may report a popping noise at the rear of the vehicle. This noise typically occurs when driving over … Read more

Clicking Noise from Front Axle – 2007-2013 Mitsubishi Outlander & 2008-2015 Lancer

SUBJECT: CLICKING NOISE FROM FRONT AXLE No: TSB-10-26-001 DATE: May, 2010 MODEL: See below   This TSB supercedes TSB-08-26-002, issued February, 2008, to add affected vehicles, part numbers and revise repair instructions and warranty information. This is a complete rewrite and revised information is not indicated.   PURPOSE Customers of some affected vehicles may notice … Read more

Chirping Noise from Drive Belt – 2006-2007 Mitsubishi Raider

SUBJECT: CHIRPING NOISE FROM DRIVE BELT No: TSB-07-11-005 DATE:  August, 2007 MODEL: 2006 – 2007 Raider   PURPOSE On some affected vehicles, the accessory drive belt may make a chirping sound when the steering wheel is turned to full lock (typically during parking maneuvers). To eliminate this condition, replace the alternator pulley with a new, … Read more