“This site contains affiliate links for which OEMDTC may be compensated” |
SUBJECT:
HARD TO START ENGINE DTC P0340 (and P0335) | No: TSB-07-11-001 |
DATE: January, 2007 | |
MODEL: 2002-07 Lancer 2.0L |
PURPOSE
The engine may be hard or impossible to start and MFI DTC P0335 and possibly P0340 may be stored due to abnormal wear to the camshaft position sensor support. Oil grooves have been added to the camshaft position sensor support to improve lubrication. If a customer has a vehicle with the above condition, replace the camshaft position sensor support with the new part listed in the PARTS INFORMATION section of this bulletin.
AFFECTED VEHICLES
2002-07 Lancer 2.0L
PROCEDURE
Replace the camshaft position sensor support as described in Group 11B, GENERATOR AND IGNITION SYSTEM REMOVAL AND INSTALLATION, of the appropriate service manual.
IMPORTANT! Carefully remove all debris from the end of the camshaft position sensor before reinstalling it.
PARTS INFORMATION
Use the genuine Mitsubishi Part listed below.
Description | Part Number |
---|---|
Camshaft Position Sensor Support | 1865A128 |
WARRANTY INFORMATION
Camshaft Position Sensor Support Replacement | |
Nature Code: 02D | Cause Code: 150 |
Labor Operation No. 16832210 | Time Allowance: 0.3 hr. |
For Vehicles Covered by the California Emissions Warranty: | |
Warranty Coverage: 3 years/50,000 miles 2002, 2003 & 2004 models sold prior to 7/1/2004 | |
All Other Vehicles – Basic Warranty Coverage: | |
Warranty Coverage: 3 years/36,000 miles for 2002-03 & 2004 models sold prior to 7/1/2004 | |
Warranty Coverage: 5 years/60,000 miles for 2004-07 models sold on or after 7/1/2004 | |
Special Warranty Information: Normal warranty procedures apply. |