Hard to Start Engine DTC P0340 (and P0335) – 2002-2007 Mitsubishi Lancer

SUBJECT: HARD TO START ENGINE DTC P0340 (and P0335) No: TSB-07-11-001 DATE: January, 2007 MODEL: 2002-07 Lancer 2.0L   PURPOSE The engine may be hard or impossible to start and MFI DTC P0335 and possibly P0340 may be stored due to abnormal wear to the camshaft position sensor support. Oil grooves have been added to … Read more

DTCs P0657, P1590, U0101, P0201 – P0206 & Possible No Start – 2007-2008 Mitsubishi Outlander & 2008 Lancer

SUBJECT: DTCs P0657, P1590, U0101, P0201 – P0206 & POSSIBLE NO START No: TSB-07-13-010 DATE: December, 2007 MODEL: See Below   PURPOSE Some affected vehicles may experience any or all of the following DTCs after the vehicle has been operated in very cold weather (approximately -5o F (-20oC) or colder) after a short drive (5 … Read more

Clicking Noise from Front Axle – 2007-2013 Mitsubishi Outlander & 2008-2015 Lancer

SUBJECT: CLICKING NOISE FROM FRONT AXLE No: TSB-10-26-001 DATE: May, 2010 MODEL: See below   This TSB supercedes TSB-08-26-002, issued February, 2008, to add affected vehicles, part numbers and revise repair instructions and warranty information. This is a complete rewrite and revised information is not indicated.   PURPOSE Customers of some affected vehicles may notice … Read more

Power Seat Adjustment Cable – 2004-2012 Mitsubishi

SUBJECT: NOISE AND POOR OPERATION OF POWER SEAT No: TSB-10-52A-002 DATE: March, 2010 MODEL: See below   This TSB supercedes TSB-05-52A-002, issued November, 2005, to add affected vehicles and revise repair instructions. Revised information is italicized and indicated by ◄.   PURPOSE If the driver’s power seat adjustment does not operate properly or exhibits noise, … Read more

Chirping Noise from Drive Belt – 2006-2007 Mitsubishi Raider

SUBJECT: CHIRPING NOISE FROM DRIVE BELT No: TSB-07-11-005 DATE:  August, 2007 MODEL: 2006 – 2007 Raider   PURPOSE On some affected vehicles, the accessory drive belt may make a chirping sound when the steering wheel is turned to full lock (typically during parking maneuvers). To eliminate this condition, replace the alternator pulley with a new, … Read more